Water Blast: Encore water blasting systems utilize off-the-shelf proven technology for water blasting cleaning of carriers and components for a wide variety of configurations and water blasting requirements. TKS & Encore Automation offer a comprehensive portfolio of surface preparation and surface cleaning systems for any industrial paint line. TKS and Encore Automation offer a top-of-the-line automated feather duster system at the entrance of the coating booths. We source and assemble the ostrich feather rolls in-house to ensure quality. The automated feather dusters are equipped with a vacuum system to pull off any debris, dust, or dirt picked up – allowing for continual operation without any maintenance needed.
TKS can offer both automated and manual sealer solutions. Turnkey automated solutions include robots, vision systems, vehicle model ID, material supply systems, and applicators in addition to the standard spray booths with downdraft HVAC. TKS employs a large staff of full-time engineers. From sizing equipment based on heat loads and specifications to designing new layouts for brand new paint shops, our Engineering & CAD team can provide full-service engineering. We design custom paint booths, industrial ovens, and other paint process equipment.
From High-pressure water sprays to De-greasing to Surface Conditioner and Phosphate, and now, Metal Oxide Pretreatment for Aluminum bodies, TKS offers up to 10 different process steps to configure for your application. TKS has a patented counterflow design circulation system for Electro-deposition (ED) tanks. Rather than a traditional eddy swirling, which kicks up dirt from the bottom of the tank, our Counter-flow technology moves the entire ED current in one direction, from exit to entry. At vehicle entry the e-coat paint / UF water mixture is pulled through a UF filter module, and pumped back to the end of the tank. This ensures that the last layers of ED coating are the cleanest. Find more information on https://www.tksindustrial.com/paint-systems.
TKS can design heated flash off tunnels for your paint process, using a heater box to provide hot air blow (HAB) to allow for the waterborne paint to set prior to the next coat of paint. Typically followed by a short cooling tunnel with cold air blow (CAB) to return the vehicle to near room temperature before the next layer of paint is applied.
In most paint shops, all major paint cure ovens are followed by a cooling tunnel to return the body to a lower temperature. This reduces the amount of paint smoke that is exhausted into the plant, ensures the bodies are at a cool enough temperature for team members to touch or for more paint to be applied, and also reduces the overall heat-up of the building.
Integrity is in the forefront of our every business endeavor. How we are perceived by our customers, suppliers and associates will determine our future. Also, how we achieve our goal is as significant as the goal. Therefore, we will conduct ourselves in such a manner as to convey our credo of honesty, fairness and ethical behavior. Find extra info on TKS oven.