Best ultrasonic water level sensor online shopping? For the monitoring of toxic, highly corrosive and dangerous liquids, HS-ULC-Pro Ultrasonic Non-contact Liquid Level Controller is an ideal choice. Sino-Inst offers a variety of Radar Level Transmitters for level measurement. If you have any questions, please contact our sales engineers. Advanced signal processing methods. Can overcome the influence of temperature drift. Stronger anti-interference; Brand new installation method. Adsorption type + adhesive type. Can improve the stability of the probe; Built-in temperature sensor. Monitor temperature changes for 24 hours. Temperature compensation is also possible; Adopt a new single probe mode. Installation is more convenient. Avoid repeated verification; A new handheld operator can be used to debug the instrument. The probe status can be detected to ensure reliable installation of the probe. It can support on-site upgrade of digital probe software. The historical data of the secondary meter can be read wirelessly.
The advantages of ultrasonic liquid level gauge are very outstanding. It is mainly reflected in the following aspects : The structure is simple. The reading is convenient. It is very easy to install and maintain. Of course, the ultrasonic liquid level gauge also has its own limitations and insurmountable defects. Specifically, it is mainly manifested in: There is a blind spot in the ultrasonic liquid level measurement. The dead zone is the area where the meter cannot measure. During the transmission of ultrasonic pulses, a small area near the ultrasonic transducer usually cannot receive sound waves. The blind zone where sound waves cannot be received is related to the measurement distance of ultrasonic waves. Generally speaking, the smaller the measurement distance, the smaller the blind zone. The larger the measurement distance, the larger the blind zone.
In the measurement, the ultrasonic pulse is emitted by the sensor (transducer), and the sound wave is reflected by the liquid surface and then received by the same sensor or ultrasonic receiver. Through piezoelectric crystal or magnetostrictive device into electrical signals. The distance between the sensor and the measured liquid surface is calculated by the time between the transmission and reception of sound waves. Discover additional info on https://www.drurylandetheatre.com/hs-ulc-ultrasonic-level-switch-external-mounted/.
The External Ultrasonic Tank Level Sensor adopts the sonar echo ranging principle. It overcomes the influence of the tank wall on the transmission of ultrasonic signals. It adopts advanced digital signal processing technology. It can truly realize non-contact, high-precision measurement of the liquid level in the tank. The External Ultrasonic Tank Level Sensor can output 4-20mA standard signals or output the measurement results to the upper computer (or secondary meter) through the RS-485 interface. It can meet the automatic control of the system.
What is ultrasonic level sensor? Ultrasonic level sensor is a monitoring instrument for measuring liquid height, tank height, and material position. The ultrasonic level sensor can adopt two-wire, three-wire or four-wire technology. The two-wire system is: power supply and signal output are shared. The three-wire system is: the power supply circuit and the signal output circuit are independent. When using DC 24v power supply, a 3-core cable can be used, and the negative terminal of the power supply and the negative terminal of the signal output share a core wire. The four-wire system is: when using AC 220v power supply, or when using DC 24v power supply. When the power supply loop and the signal output loop are required to be completely isolated. A 4-core cable should be used. Discover extra details at https://www.drurylandetheatre.com/.